Product Description
Allow this 1950’s four-engine military-based aircraft to hover over your home. The C-130 Hercules is the longest continuously produced military aircraft – which is still being used today by the United States Air Force and the United States Marine Corps – Made of 14-gauge steel, this weathervane adds a touch of beauty in any home or garden setting. Design is approximately: 18 1/4" long x 9 1/4" tall. Easily installs in less than 1 minute. Intricate laser cut design with 3 protective coatings baked on to prevent rust or fading for years. Complete set includes laser cut top, windcups that have sealed ball bearings to gently turn in any breeze, an EWNS directional that tells the direction the wind is coming from and your choice of mount.
Complete Weathervane
Includes: Design Top, Windcups, EWNS Directional, and choice of one mount.
EACH EZ VANE STEEL WEATHERVANE INCLUDES YOUR CHOICE OF MOUNT
3 Sided Mount: This mount mounts to the outside of a gazebo or cupola. It includes a 12" rod. Order the 3 sided mount for 3 or 6 sided peaks. Order the 4 sided mount for 4 or 8 sided peaks. Each leg of the mount measures approximately 5 3/4" long from the center of the upright tube.
4 Sided Mount: The four sided mount is made for mounting to a 4 or 8 sided cupola or gazebo. This mount comes with a 12" rod(not pictured). Each leg of the mount measures approximately 5 3/4" long from the center of the upright tube.
Deck Mount: Mount to a flat board i.e. deck board. It is approx. 3" x 3" and includes the 12" rod(not pictured).
Garden Mount: 60" mount includes stabilizing ground stake. The garden mount ships in two pieces and must be screwed together upon arrival.
Post Mount: The post mount or (side mount) will mount to the side of a fence of vertical board. It is approx. 3"x 3" and includes the 12" rod(not pictured).
Roof Mount: Our roof mount is adjustable, but is made to a 4/12 roof pitch. It includes a 12" rod.
Cupola Mount: Our cupola mount is installed inside the cupola and protrudes from the standard 3/4in. hole in the center of the cupola roof. The EZ Vane cupola mount includes a standard rod with a 3/4" x 2" female adapter sleeve. The cupola mount adapter is intended to be threaded into a 3/4" upright bolt that you provide inside the cupola. **($17.50 additional per vane)